|
NAVIGATION AND ELECTRONICS: Autopilot Raymarine P70R Chartplotter Raymarine Fishfinder Echo soundeer Raymarine Dragonfly 5 Chaincounter Quick
VHF Simrad
Radar Raymarine
ENTERTAINMENT: Radio Clarion speakers in saloon / on deck
GALLEY AND WATER SYSTEM: Kitchen: 4 burner el. stove, refrigerator, double sink Cockpit: sink
Electric toilet
PROPULSION, POWER: 2 x Shaft drive IVECO N60 ENTM37 2x370hp(2x275,9kW) Bow thruster Battery charger
MOORING AND ANCHORING: El. anchor windlass Quick
GENERAL: Hydraulic gangway Teak in cockpit / on deck / stern platform Sunbathing cushions on deck
Boat work list
Deck and stern bridge
Construction of a new deck over the fore and aft decks, in solid teak 12 millimetres thick, glued on polyurethane elastic support and interspersed with black polyurethane rubber jointing chiments of the same shape and size as the existing one in place. Construction of a new grating on the stern platform in solid teak wood with the same measurements as the existing one in place.
Demolition of the carabottino supports on the stern platform and cutting of the damaged plywood parts. Construction of a new support for the duckboard in solid Iroko wood and restoration of the removed parts of the plywood frame. Discing and restoration of the fibreglass underneath the swim platform, sanding and application of two coats of antifouling. Gluing of marine plywood over the entire surface of the swim platform and solid wood edging of the inner part.
Gangway Construction of two new solid teak gratings for the gangway Construction of a filler inside the transom cavity with solid iroko wood and epoxy resin Construction of a stainless steel counterplate, 10 millimetres thick, inside the transom to be coupled to the outer plate of the gangway, construction of a tie rod system with threaded rods and bow bars to be attached to the hull stringers to counteract the leverage exerted by the gangway on the transom Hull and deckhouse Sanding of the deadwork and application of two coats of Awl Grip 545 primer and two coats of Awl Grip Sea Foam paint (green). Resurfacing of the waterline, freeboard, name and plates. Sanding of deckhouse and cockpit, application of two coats of Awl Grip 545 primer and two coats of white Awl Craft paint. Sanding of deckhouse window frames, application of six coats of polyurethane component primer and six coats of clear polyurethane paint. Repair of damaged parts of the mainmast, sanding and application of eight coats of clear gloss varnish.
Engine Replacement of engine block (left) and wiring
Broker's comission excluded
Don't hesitate to call us!
We kindly invite you to contact us by e-mail or on our mobile phone bellow for any further information.
PARLIAMO ITALIANO, WE SPEAK ENGLISH, WIR SPRECHEN DEUTSCH
YACHT BROKER: Aleks - 00385 91 547 0206 (WhatsApp ?/ Viber ?) ITA / ENG / SLO / HR
--------------------------------------------------------------------------- Available from Tuesday to Saturday 08-12h, 13h-16h Monday and Sunday CLOSED ---------------------------------------------------------------------------
[email protected]
The visit of the boat is possible with min 3 days previous notice (subject to prior sale)
Disclaimer The Company provides the information about this boat in good faith, but cannot guarantee the accuracy of this information and the condition of the boat. The offer of this boat is subject to prior sale, price change or withdrawal of the offer without prior notice.Disclaimer of warranty | Liability exclusionThe Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
|